Automation and cutting technology
TECHTORY Automation GmbH
Ludwig-Winter-Straße 5
77767 Appenweier
Phone | +49 7805 9589-0 |
Fax: | +49 7805 9589-50 |
Email: | info@techtory.de |
Workpiece: |
Slot nut |
Task: |
Efficient deburring of two threaded holes that cannot be deburred in the CNC process, embossing of the finished parts, subsequent portioning as bulk material in shipping boxes |
Solution: |
The system is based on the TECHTORY standard cell system and combines the advantages of the two cell types table-cell and floor-cell.
The workpieces are fed manually as bulk material into a vibratory conveyor system and separated by means of linear handling. Before the sliding blocks are transferred to the rotary indexing table, the holes are checked for presence, position and dirt using a vision sensor. This is followed by transfer to the individual processing stations. In stations 2+3, the threaded holes are deburred from the outside using countersinks and from the inside using brushes. Lances and nozzles in station 4 blow out the holes. In station 5, the sliding blocks are embossed with the part number and the company logo. A removal handling system then places the finished parts on a pivoting conveyor belt. This is used to fill three shipping cartons according to a previously defined quantity. |
Customer benefits: |
Feeding of workpieces as bulk material, automatic deburring of threaded holes on the outside and brushes on the inside, automatic embossing of OK parts, portioning according to preset number of pieces, system design with TECHTORY standard cell, safety interlock and integrated system light, low-vibration frame, good visibility through large windows |
Slot nut
Efficient deburring of two threaded holes that cannot be deburred in the CNC process, embossing of the finished parts, subsequent portioning as bulk material in shipping boxes
The system is based on the TECHTORY standard cell system and combines the advantages of the two cell types table-cell and floor-cell.
The workpieces are fed manually as bulk material into a vibratory conveyor system and separated by means of linear handling. Before the sliding blocks are transferred to the rotary indexing table, the holes are checked for presence, position and dirt using a vision sensor. This is followed by transfer to the individual processing stations. In stations 2+3, the threaded holes are deburred from the outside using countersinks and from the inside using brushes. Lances and nozzles in station 4 blow out the holes. In station 5, the sliding blocks are embossed with the part number and the company logo. A removal handling system then places the finished parts on a pivoting conveyor belt. This is used to fill three shipping cartons according to a previously defined quantity.
Feeding of workpieces as bulk material, automatic deburring of threaded holes on the outside and brushes on the inside, automatic embossing of OK parts, portioning according to preset number of pieces, system design with TECHTORY standard cell, safety interlock and integrated system light, low-vibration frame, good visibility through large windows
Automation and cutting technology
TECHTORY Automation GmbH
Ludwig-Winter-Straße 5
77767 Appenweier
Phone | +49 7805 9589-0 |
Fax: | +49 7805 9589-50 |
Email: | info@techtory.de |