Automation and cutting technology
TECHTORY Automation GmbH
Ludwig-Winter-Straße 5
77767 Appenweier
Phone | +49 7805 9589-0 |
Fax: | +49 7805 9589-50 |
Email: | info@techtory.de |
The rolls, which are randomly placed on a feed belt by a pilot-controlled machine, are to be picked up by a gripper and deposited in an orderly manner in the boxes provided.
Eine Schleifmaschine soll automatisiert mit Wellen unterschiedlicher Abmessungen be- und entladen werden. Die geschliffenen Wellen sind anschließend zu reinigen und optisch zu vermessen. Zusätzlich sind ein Eichmeister und Abrichtwerkzeuge zu handeln.
Development and manufacture of a semi-automated system for the assembly and testing of caustic containers.
A semi-automated assembly of fresh air grills for motor vehicles with final quality control is to be carried out at several successive work stations.
Development and construction of a test rig for testing the long-term serviceability of pressure reducers.
The bearing housings are to be joined to finished assemblies in a semi-automatic system with needle bearings, inner rings and bolts and then subjected to a torque test.
Fully automatic loading of two grinding machines with shafts, separation and robot handling
Development and construction of a system for the fully automated assembly, testing and marking of ball valves in various variations as well as an adjacent, partially automated assembly and packaging station.
Efficient deburring of two threaded holes that cannot be deburred in the CNC process, embossing of the finished parts, subsequent portioning as bulk material in shipping boxes.
Development and construction of a semi-automatic plant for the assembly of quick couplings. A modular design and conversion kits should make it possible to convert to different variants.
Two different deep-drawn sheet metal parts, one on the right and one on the left, are to be glued and inspected by a robot in collaborative operation.
Fully automatic gluing and mounting of a holder in a housing including measurement of the joined assembly
The assembly and quality inspection of ventilation nozzles is to be carried out at several, successive work stations. The assemblies consist of individual housing parts, various individual parts and slats as well as decorative parts.
A variant of the cell-systems was selected from the standard program of the TECHTORY automation modular system. The desired dimensions and minor adjustments according to customer requirements were incorporated in the design and the cell was then manufactured.
Positionally correct transfer of threaded bushings to a grinding machine as well as cleaning and measuring of the ground parts.
Robot-assisted loading of a CNC machining center with production parts.
Development, design, manufacture, assembly and commissioning of a fully automated system for the machining, assembly and testing of angle encoders.
Gear pumps are to be assembled and tested in successive steps at several semi-automated workstations.
Automation of the loading of a CNC milling center under collaborative conditions.
Automation of workpiece transport by means of workpiece carrier system, robot cell and two gripper units. Automation of the deburring process by robotic brushing cell.
Development of a mobile platform to accommodate cobots and industrial robots from a wide range of manufacturers and for handling various pipes using vacuum grippers.
Development of a fully automated machining, assembly and testing station for the production/assembly of baffle plates.
A self-sufficient system for automatic processing and testing of resistance piping is to be developed.
The assembly and quality inspection of ball valves in various variations is to be partially automated or automated at .
The assembly and quality inspection of ventilation nozzles is to be carried out at several, successive work stations. The assemblies consist of individual housing parts, different louvers as well as decorative parts.
Fully automatic loading of a grinding machine with crankshafts followed by a cleaning process.
Development of an automated assembly system for the production of assemblies from difficult sheet metal parts “fastening element with support spring”.
A system for the fully automatic punching of foils in 3-shift operation is to be developed and built.
Light guides are to be pressed into a previously manually assembled injection molded part and checked for presence in a camera station
Efficient deburring of bores and all additional burrs on planetary carriers
The rolls, which are randomly placed on a feed belt by a pilot-controlled machine, are to be picked up by a gripper and deposited in an orderly manner in the boxes provided.
Eine Schleifmaschine soll automatisiert mit Wellen unterschiedlicher Abmessungen be- und entladen werden. Die geschliffenen Wellen sind anschließend zu reinigen und optisch zu vermessen. Zusätzlich sind ein Eichmeister und Abrichtwerkzeuge zu handeln.
Development and manufacture of a semi-automated system for the assembly and testing of caustic containers.
A semi-automated assembly of fresh air grills for motor vehicles with final quality control is to be carried out at several successive work stations.
Development and construction of a test rig for testing the long-term serviceability of pressure reducers.
The bearing housings are to be joined to finished assemblies in a semi-automatic system with needle bearings, inner rings and bolts and then subjected to a torque test.
Fully automatic loading of two grinding machines with shafts, separation and robot handling
Development and construction of a system for the fully automated assembly, testing and marking of ball valves in various variations as well as an adjacent, partially automated assembly and packaging station.
Efficient deburring of two threaded holes that cannot be deburred in the CNC process, embossing of the finished parts, subsequent portioning as bulk material in shipping boxes.
Development and construction of a semi-automatic plant for the assembly of quick couplings. A modular design and conversion kits should make it possible to convert to different variants.
Two different deep-drawn sheet metal parts, one on the right and one on the left, are to be glued and inspected by a robot in collaborative operation.
Fully automatic gluing and mounting of a holder in a housing including measurement of the joined assembly
The assembly and quality inspection of ventilation nozzles is to be carried out at several, successive work stations. The assemblies consist of individual housing parts, various individual parts and slats as well as decorative parts.
A variant of the cell-systems was selected from the standard program of the TECHTORY automation modular system. The desired dimensions and minor adjustments according to customer requirements were incorporated in the design and the cell was then manufactured.
Positionally correct transfer of threaded bushings to a grinding machine as well as cleaning and measuring of the ground parts.
Robot-assisted loading of a CNC machining center with production parts.
Development, design, manufacture, assembly and commissioning of a fully automated system for the machining, assembly and testing of angle encoders.
Gear pumps are to be assembled and tested in successive steps at several semi-automated workstations.
Automation of the loading of a CNC milling center under collaborative conditions.
Automation of workpiece transport by means of workpiece carrier system, robot cell and two gripper units. Automation of the deburring process by robotic brushing cell.
Development of a mobile platform to accommodate cobots and industrial robots from a wide range of manufacturers and for handling various pipes using vacuum grippers.
Development of a fully automated machining, assembly and testing station for the production/assembly of baffle plates.
A self-sufficient system for automatic processing and testing of resistance piping is to be developed.
The assembly and quality inspection of ball valves in various variations is to be partially automated or automated at .
The assembly and quality inspection of ventilation nozzles is to be carried out at several, successive work stations. The assemblies consist of individual housing parts, different louvers as well as decorative parts.
Fully automatic loading of a grinding machine with crankshafts followed by a cleaning process.
Development of an automated assembly system for the production of assemblies from difficult sheet metal parts “fastening element with support spring”.
A system for the fully automatic punching of foils in 3-shift operation is to be developed and built.
Light guides are to be pressed into a previously manually assembled injection molded part and checked for presence in a camera station
Efficient deburring of bores and all additional burrs on planetary carriers
Automation and cutting technology
TECHTORY Automation GmbH
Ludwig-Winter-Straße 5
77767 Appenweier
Phone | +49 7805 9589-0 |
Fax: | +49 7805 9589-50 |
Email: | info@techtory.de |